Cap kit for Super Nintendo / SFC - SMD Snes Super Famicom Replacement capacitors

€7.99
Capacitors mount type
  • Trough hole (Radial capacitors)
  • SMD
Version
  • PAL SNES - Version 1
  • PAL SNES - Version 2
  • USA SNES or SFC - Version 1
  • USA SNES or SFC - Version 2

Set of electrolytic capacitors to restore/repair your console

Quality capacitors, brand new

Cap Kit available in SMD (Surface Miniature Components) or Radial (through hole capacitor)

The SMD version includes the same capacitors as the original ones on the console

Whether the SMD version or through hole versiont behave the same way as once installed

Even with the SMD version of the kit some capacitors are radial type, as on the original consoles

There are several revisions of motherboards, to identify your version, you need to open your console, the reference is written on the motherboard (example: SNSP-CPU-01)

versions SNES PAL - Version 1:
SNSP-CPU-01
SNSP-CPU-02

SNES PAL - Version 2:
SNSP-CPU-1chip-01
SNSP-CPU-1chip-02

SNES USA or SFC - Version 1:
SHVC-CPU-01
SHVC-CPU-02

SNES USA or SFC - Version 2:
SNS-CPU-GPM-01
SNS-CPU-GPM-02
SNS-CPU-RGB-01
SNS-CPU-RGB-02
SNS-CPU-APU-01
SNS-CPU-1chip-01
SNS-CPU-1chip-02

Notes: - Some capacitor voltages may be higher than the original capacitor, this has no impact (contrary to the opposite case ...)

The installation of a cap kit requires a minimum of solder knowledge and adapted equipment. Take care to respect the polarity (the direction) of the capacitors. You can ask our workshop to take care of the installation of this cap kit

Note: the picture is generic, it does not fit this cap kit

You might also like

16 other products in the same category