Some tips before starting :
- Choose a suitable place, with space and lighting!
- Take your time
- Use suitable tools, not a soldering iron too powerful with a huge tip ...
- You will find the few equipment for this installation in our tooling section

Installation guide for SNS-CPU-RGB-01

First step :
Cut the pin of C19 capacitor as short as possible, so that it does not interfere with the installation of the kit

Remove the 11 components circled in yellow (area 1 and 2)

=> 4 caps: C44, C45, C47, C50
=> 4 resistors: R56, R57, R58, R18
=> 3 transistors: Q1, Q2, Q3

Installation and wiring of the kit

Install the kit as on the image below, then solder the 12 points
Then connect the R, G, B and S points of the kit using wires to the motherboard (R, G, B, S points are shown in images 1 and 2 above)

Installation guide for SNSP-CPU-02 revision

Remove components C44, C45, C47, DA12, DA13, DA14, DA15, DA18, DA19 et DA20 :

Remove Q3, Q5, Q7, and solder points R ,G ,B et S to the kit :